This instruction will show you guide on how to removing and installing switch module for driver side window lift on Volkswagen Bora 2006.
Preparation:
VW ODIS 7.2.1 & 5.2.7 Diagnostic Software Free Download
[08.2021] VW ODIS 7.2.1 All Brands & ODIS-E 12.2.0+KG Installation+Instruction
Procedures:
Special tools required
Removal wedge - VAS 3409
When removing and installing components in visual area (connectors, covers, trims etc.) apply a commercial adhesive tape where a lever tool is applied ( removal wedge -VAS 3409- , srewdriver).
The following components (in models with 4 doors) are integrated into the switch module for the driver side window lift:
Front left window regulator switch -E40-
Rear left window regulator switch, in driver door -E53-
Rear right window regulator switch, in driver door -E55-
Front right window regulator switch in driver door -E81-
Childproof lock button -E318-
Button illumination bulb -L76-
Note
In the event of repair, the complete component must be renewed.
The following components (in models with 2 doors) are integrated into the switch module for the driver side window lift:
Front left window regulator switch -E40-
Front right window regulator switch in driver door -E81-
Button illumination bulb -L76-
Note
In the event of repair, the complete component must be renewed.
Removing:
– Switch off the ignition and all electrical consumers.
– Carefully lever installation frame out of door trim using removal
wedge -VAS 3409- or screwdriver -arrow-.
Remove connectors - arrows-
Release locking lugs -arrows- and remove switch from the installation frame.
Installing:
Install in reverse order of removal.
