2021年6月7日星期一

How to Correct Driver’s Seat Position on Mercedes Benz

 

This article will show you how to correct drivers seat position on Mercedes Benz.


Observe the safety guidelines on seat adjustment .

Make sure that seat = is adjusted properly.

Manual seat adjustment

Electrical seat adjustment

06.2021 Benz Xentry.OpenShell.XDOS Diagnostic Software Free Download

When adjusting the seat, make sure that:

you are as far away from the driver's air bag as possible

you are sitting in a normal upright position

you can fasten the seat belt properly

you have moved the backrest to an almost vertical position

you have set the seat cushion angle so that your thighs are gently supported

you can depress the pedals properly

Check whether the head restraint is adjusted properly .

When doing so, make sure that you have adjusted the head restraint so that the back of your head is supported at eye level by the center of the head restraint.

Observe the safety notes on steering column adjustment .

Make sure that steering wheel : is adjusted properly.

Adjusts the steering wheel

06.2021 Benz Xentry.OpenShell.XDOS Download +Installation+Activation

 

When adjusting the steering wheel, make sure that:

you can hold the steering wheel with your arms slightly bent

you can move your legs freely

you can see all the displays in the instrument cluster clearly

Observe the safety guidelines for seat belts.

Check whether you have fastened seat belt ; properly.

 

The seat belt should:

fit snugly across your body

be routed across the middle of your shoulder

be routed in your pelvic area across the hip joints

Before starting off, adjust the rear-view mirror and the exterior mirrors in such a way that you have a good view of road and traffic conditions.

Vehicles with a memory function: save the seat and exterior mirror settings.

没有评论:

发表评论

Electrical Wiring and Harnessing Installation on 2006 GM/Isuzu Truck

  To increase the reliability of the wiring, all frame harnesses are covered with corrugated vinyl tubing. The following instructions apply ...